HARDWARE FEATURES

Processor

Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc

Memory

64MB DDR2 RAM, 8MB Flash

Interface

1 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in)

1 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE Passthrough)

1 Grounding Terminal

1 Reset Button

Power Supply

Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)

Voltage range: 16-27VDC

Power Consumption

14 Watts Max

Note: When deployed using Passive PoE, the power drawn from the power source 

will be higher by some amount depending on the length of the connecting cable.

Dimensions ( W x D x H )

11×3.1×2.4 inch (276×79×60mm)

Antenna Type

Built-in 16dBi 2x2 Dual-polarized Directional Antenna

Beam Width: 45° (H-Plane) / 30° (E-Plane)

Note: For more details, please refer to datasheet

Protection

15KV ESD Protection

6KV Lightning Protection

Enclosure

Outdoor ASA stabilized plastic material

IPX5 waterproof Certification

WIRELESS FEATURES

Wireless Standards

IEEE 802.11a/n (with Pharos MAXtream disabled)

Proprietary Protocol

TDMA Mode (with Pharos MAXtream enabled)

Wireless Speeds

Up to 300Mbps (40MHz,Dynamic)

Up to 144.4Mbps (20MHz,Dynamic)

Up to 72.2Mbps (10MHz,Dynamic)

Up to 36.1Mbps (5MHz,Dynamic)

Frequency

5.15~5.85GHz

Note: Available operating frequency may vary depending on the 

limitations of the countries or regions in which the device is used.

Transmission Power

27dBm/500mw (Adjustable power by 1dBm)

Note: Maximum transmission power may vary across different channels depending 

on the limitations of the countries or regions in which the device is used.

SOFTWARE FEATURES

Wireless Configurations

Pharos MAXtream TDMA Technology

802.11a/n Modes

Selectable Channel Width: 5/10/20/40MHz

Automatic Channel Selection

Transmission Power Control

Dynamic Frequency Selection (DFS)

WDS Enable/Disable

Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption

SSID Broadcast Enable/Disable

Multi-SSID with VLAN Tagging (AP mode only)

Distance/ACK Timeout Setting

Wireless MAC Address Filter

Wireless Advanced:

> Beacon Interval/RTS Threshold/Fragmentation

>Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia

Management

Discovery and Remote Management via Pharos Control application

HTTP/HTTPS Web-based management

System Log

SNMP Agent(v2c)

Ping Watch Dog

Dynamic DDNS

SSH Server

System Tools

Wireless Signal Quality Indicators:

Signal Strength/Noise/Transmit CCQ/CPU/Memory

Monitors: Throughput/Stations/Interfaces/ARP/Routes/WAN/DHCP

Spectrum Analyzer

Speed Test

Ping

Traceroute

System-level Optimizations

Optimized IGMP Snooping/Proxy for multicast applications

Hardware watch dog

POE ADAPTER FEATURES

Dimensions(W x D x H)

110×57×33.5mm

Input Current

0.8A Max @ 100VAC

Input Voltage

100VA~240VAC @ 50Hz~60Hz

Output

24VDC, 1.0A Max

+4, 5pins; -7, 8pins. (Support up to 60m Power over Ethernet)

Efficiency

>80%

Output Voltage

24VDC(+4,5pins; -7,8pins)

Input

100-240VAC, 50/60Hz

Power Status LEDs

0~0.8A: Green

0.8A~1.0A: Red

Certifications

CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark

Interfaces

1 AC Jack with Earth Ground

1 10/100/1000Mbps Shielded Ethernet Port (Power + Data)

1 10/100/1000Mbps Shielded Ethernet Port (Data)

Button

Remote Reset Button

OTHERS

Certification

CE, FCC, RoHS, IPX5

Package Contents

Outdoor Wireless CPE

24V 1A Passive PoE Adapter

Pole Mounting Straps

AC Power Cord

Installation Guide

System Requirements

Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, 

Windows 7, MAC OS, NetWare, UNIX or Linux.

Note: We recommend you to use one of following Web browsers for an improved user 

experience: Google Chrome, Safari, and Firefox. IE browsers are not recommended.

Environment

Operating Temperature: -30°C~70°C (-22℉~158℉)

Storage Temperature: -40℃~70℃ (-40℉~158℉)

Operating Humidity: 10%~90% non-condensing

Storage Humidity: 5%~95% non-condensing